WARNING

Using following command(s) can or will damage or delete your ledokol settings!

Remove all Ledokol tables and files

!ledokoluninstallisconfirmed

AirDC++ je nenáročný a jednoduchý klient pro Direct Connect síť, umožňuje uživatelům sdílet soubory s přáteli a dalšími lidmi na internetu nebo lokální síti. Vyniká více schopnostmi v porovnání například s DC++ a StrongDC++, z kterých je odvozen.

• Autor: Night, Yada, NT, Zinden, maksis (nano)
• Web: http://airdcpp.net/
• Guides section: http://www.airdcpp.net/guides
• Customization portal: http://www.airdcpp.net/c/customizations
• Comunity forum: http://www.airdcpp.net/forum
• AirDC++ nano (Linux) popis a instalace: http://www.airdcpp.net/nano
• Průvodce nastavením AirDC++

• Podpora částečného obnovení filelistu pro obnovení pouze jedné složky sdílení
• Profily sdílení
• Schopnost otevřít několik spojení s jedním uživatelem
• Sdružování souborů ve frontě do složek
• Možnost přidat vlastní vyhledávání, které budou pravidelně vyhledávány a automaticky se stahnou, když budou nalezeny výsledky
• Pokročilé sdílení již částečně stažených složek/souborů a více efektivní způsob hledání alternativních zdrojů
• Jednoduchý průvodce nastavením pro začátečníky
• Podpora NMDC a ADC protokolú a šifrovaného přenosu v obou protokolech

AirDC++ také obsahuje několik unikátních schopností pro uživatele sdílející a stahující soubory ve standartizovaném release formátu (original release).

Pokročilý scanner pro chybějící extra soubory a duplicitní názvy složek obsahující tyto schopnosti:

• Hledání chybějících souborů podle seznamu v SFV souboru release
• Detekce složek obsahujících více NFO/SFV soubory a složek kde tyto chybí
• Detekce extra souborů ve složkách release
• Vyhledání duplicitních release složek ve sdílení
• Může být použito pro scanování kompletního sdílení nebo jen pro vybrané složky z vlastního filelistu

Zobrazení NFO souboru ve vyhledávacím okně (přidáno ve verzi 2.10)

• Tuhle volbu máte možnost vybrat v kontext menu nabídce u jakýchkoliv výsledků hledání (složky, soubory) a klient poté zobrazí NFO soubor náležící výsledkům hledání přímo v okně hledání

SFV checker pro vlastní soubory (přidáno ve verzi 2.10)

• Toto zajistí SVF kontrolu pro vybrané soubory a složky
• SFV checker je dostupný v okně dokončených stahování a ve vlastním filelistu

Prohledávání stránek

• Dostupné z filelistu, z okna hledání, z fronty stahování a z chatu
• Prohledávání stránek si vytáhne název release a umožní jej vyhledat na přednastavených stránkách

Názvy release v chatu zformátované do URL

• Kliknutím na název release začne jeho vyhledávání
• Pravým kliknutím na release se zobrazí volby pro prohledávání stránek

Poznámka: První spuštění může trvat dlouhou dobu, klient bude převádět vaši hash databázi do nového formátu.
AirDC++ 2.50 vyžaduje Windows Vista nebo novější operační systém, Windows XP už není podporován.

AirDC++ 3.00

Added:

- Direct encrypted private messages (CCPM feature)
- "Message seen" and "User typing" notifications in direct encrypted PM channels
- Multilingual installer
- Recheck integrity (queue): re-adds corrupted file segments for downloading, detects already downloaded segments/files and performs a SFV check
- Allow rescanning failed bundles that are not in a shared directory
- Connect in parallel via IPv4 and IPv6 if the remote user has hybrid connectivity
- Font setting for list views

Changed:

- Enable TLS v1.1 and TLS v1.2 based connections (DC++)
- Verify keyprints in Client-Client and Client-Hub connections
- Apply scanning skiplist option for checking share excludes as well
- Enable multi selection in Finished uploads

Fixed:

- Fix an issue with the remaining hashing bytes when reading of files being hashed fails
- Retry hashing of failed bundles correctly
- Don't use old language files when the settings directory location has been changed 
- Fix a bug with matching download skiplist for folders
- Fix bundle alternative searches interval adding an extra minute 
- Ensure that there are no path separators in the formatted log file parameters
- Fix issues when moving finished bundles
- Set bundles as finished if applicable when removing files from them
- Fix "Search directory" in transfer tab
- Fix minimum search interval setting
- Fix readd all and remove offline sources for subdirectories in queue
- Fix user list showing ghost users in some cases
- Fix a possible crash with client stats

AirDC++ 2.91

Added:

- Detect when volume has been removed and fail respective monitored paths
- Attempt to restore share monitoring for failed paths once per minute
- Highlight context for search

Fixed:

- Respect the size limits when searching in file lists
- Fix the dupe check during share scan
- Fix crash in Queue window
- Fix a NMDC exploit: http://te-home.net/?id=54&title=Second+ ... DC+history
- Fix possible deadlock in QueueManager

Changed:

- Reload queue list when clicking on a tree item

AirDC+ 2.90

Added:

- Share scanner check invalid sfv files
- System log option to suppress CRC OK when performing sfv check 
- Show Shared,IP,Tag in users window
- File menu item to open settings directory

Changed:

- Add space in front of Path when copying Path from Filelist window
- Continue with QueueWindow changes, sub directories / bundle content now browseable
- Allow stop sharing a temp shared file from offline PM window
- Update Openssl
- Handle open file as default menu item for finished queue items, own filelist and dupe files
- Don't allow opening own list from the hub context menu if the share has been hidden

Fixed:

- Potential freezes when removing bundles with files
- Max hub usercommand limitations, prevents malicious hubs from flooding with usercommands (DC++)
- Fix auto search item user matcher
- Fix a crash with share scanner
- Prevent opening multiple settings windows from task bar
- Several other crashes
- Fix Get TTH for file
- Fix hide share when using quick connect

Removed:

- Tab numbers 0 - 9 ALT + num to switch tab, using ALT + left/right now


AirDC++ 2.80

Added:

- Show the number of contained files and folders for directory search results (ADC)
- Use a Vista-style browsing dialog with folders
- Remember various previous locations with browsing dialogs

Changed:

- Rewrite Download queue window to more torrent like view
- Hide various menu items when clicking on own user in the users tab
- Increase the validity period of generated encryption certificates
- Strip whitespaces from hub address fields
- Better settings for changing progress bar colors

Fixed:

- Detect the connect mode of other users correctly after connecting to a hub
- Fix performance issues when queueing huge bundles and there are lots of files matching the download skiplist
- Fix handling of individual blocked versions in the the version file
- Fix a bug that may have left folder deletions unnoticed by the share monitoring in some rare cases
- Use the existing bundle path when queuing items from auto search (when possible)
- Fix heartbleed bug (update OpenSSL)

Removed:

-Finished downloads window ( Finished downloads are now shown in new Queue window )


AirDC++ 2.46 (Windows XP)

NOTE: This is going to be the last update targeted for Windows XP users. In order to receive the latest updates in future, all XP users should upgrade to a newer operating system.

Changelog

Added:

- Add CDATA parsing to XML parser (DC++)

Changed:

- Increase the validity period of generated encryption certificates

Fixed:

- Update OpenSSL in order to fix the heartbleed vulnerability
- Fix various issues with partial sharing
- Fix the connection speed units
- Fix link positions going wrong after clearing the chat
- Prevent crashes when running out of memory while loading file lists

**AirDC++ 2.72**
Added

- Add CDATA parsing to XML parser (DC++)

Changed

- Never check open file lists when trying to download directories from (auto) search as the list directory may be outdated

Fixed

- Fix TTH search responses
- Fix share monitoring spam when queuing files to a newly created directory
- Avoid refreshing the share twice on startup
- Fix a minor issue with counting the disk usage for queued items
- Fix a possible issue with reporting faulty missing NFO files when scanning the share for missing/extra files
- Remove a faulty error message in a clean installation
- Fix a possible crash when queueing a magnet link fails
- Fix renaming of hashed files on monitoring changes
- Fix a bug with adding missing files for hashing on startup


**AirDC++ 2.71**
Added:

- Automatically check for updates when the update channel was changed
- Report errors when generating a file list fails

Fixed:

- Crash fixes
- Fix opening of dupe directories from chat
- Allow .vob files inside sample directories regardless of the other sample extensions
- Also migrate notepad to the new settings directory when the location was changed
- Fix rare cases when renaming directories could have left unnoticed by share monitoring
- Don't add empty directories in share via monitoring (if enabled)


**AirDC++ 2.70**
Added:

- Option for Close button to minimize airdc
- Remove all button for edit magnets dialog
- Use the same icons in pm tab and userlist, ability to state away mode and reg status on tab icon
- Clear buttons for histories in settings
- New icons for PM and Mainchat notification in tray and taskbar, add combined icon.
- Settings for message filtering mainchat or private messages
- Option for showing ignored and message filtered chat messages in systemlog
- Severity icons in PM and Hub windows statusbars
- Option to open .nfo files externally
- New column in search tab: Relevancy (used for sorting by default)
- Configurable update channel (stable/betas)

Changed:

- Return more relevant search responses: https://bugs.launchpad.net/airdcpp/+bug/1265889 (allows using more general search terms)
- Last online time will now show for all offline users in usersframe
- Reorder readd/remove source rightclick in queueframe, move All at the top
- Settings profiles change toolbar buttons and order (old toolbar button order will get reset, sorry for that)
- Ignored users rewrite, ignored users are now shown in users window
- Update the default hublists
- Sync all database writes to disk (the latest hashed entries won't get lost in case of unexpected shutdown)
- Improved error reporting for downloads
- List shell menus for all matching local files/directories, use a submenu that is loaded only when accessed
- Auto search: Show an error message if the picked item fails because of a shared/queued directory dupe
- Auto search: Clear the last error when an associated bundle finishes
- Auto search: Ignore the search time limitations when there are missing files
- Improve statistics (/sharestats and /clientstats)
- Increase the size of the ADL search properties dialog
- Use a single installer for 32 and 64 bit version
- Require double-click for restoring the client from tray by default

Fixed:

- Fix Hash progress dialog files/h
- Keep the order when changing items in favorite download directories
- Fix magnet open error with no source user
- Fix crash on clicking magnet link in pm history
- Fix modify dates for newly added directories
- Fix a possible freeze related to file lists
- Fix an infinite connect request loop that may happen in some rare cases
- Fix an invalid NAT-T support advertised in ADC hubs when there's a disabled IP protocol
- Prevent system log spam when monitoring detects changes for files that can't be shared
- Fix bugs in partial lists causing a newly loaded directory not being selected/loaded in some cases
- Fix a bug with moving file bundles
- Fix a faulty option that prevented /verifydb from fixing corruption
- Fix changing the current share profile in own file list after it has been matched with ADL search
- Fix issues with the lowest priority
- Update the modify date of the parent directory when share monitoring changes are applied or bundles are added in share
- Report possible errors also when queueing individual files
- Fix missing incoming search matching for some directory names
- Make GUI freezes less likely to happen when generating full file list
- Fix missing country flags from some search results
- Prevent crashes when running out of memory while loading file lists, queueing new bundles or refreshing the share
- Avoid delaying GUI actions while scanning the share for missing files or running multithreaded file list refresh
- Fix logging of uploads twice in some cases
- Fix multiple items with the same name not being displayed in ADL search matches
- Fix possible crashes related to recent hubs
- Fix window updates possibly getting lost when staying in very large hubs

Removed:

- Netstats window
- Shutdown pc toolbar button function still available via /shutdown
- Toolbar bitmap settings ( old bitmaps are not compatible anyway, use icons instead )

for 1.0.0

$ vh -g

!restart

• CrazyHub.net
  • Historie
  • Detaily
  • Pravidla
  • Adresa
  • Kdo je kdo
• DC klienti
  • AirDC++
  • Android DC
  • ApexDC++
  • BCDC++
  • BMDC++
  • CzDC
  • DC++
  • DiCe!++
  • DroiDC
  • EiskaltDC++
  • FreeDC++
  • Jucy
  • LinuxDC++
  • MobileDC
  • NCurses Direct Connect
  • PocketDC
  • RSX++
  • ShakesPeer
  • SmartDC
  • StrongDC++
  • TkDC++
  • zK++
• Návody
  • Průvodce nastavením AirDC++
  • Stručný návod pro DC++
  • PocketDC - návod
  • Jak se registrovat na hubu
  • Jak na změnu klienta
  • Vysvětlení RAWů
  • Stručný seznam RAW parametrů
• Hubsoft
  • µHub
  • ADCH++
  • Dtella
    • Instalace Dtella ve Windows
    • Instalace Dtella v Linuxu
    • Instalace Dtella v Mac OS
    • Nastavení sítě
    • Dtella Errors
    • Metapod - Release bot
  • FlexHub
  • HeXHub
    • HeXHub Manuál
    • Aktualizace GeoIP databáze
  • PtokaX
  • Verlihub
    • 1. Začínáme
    • 2. Instalace
    • 3. První spuštění
    • 4. Provoz Hubu
    • 5. Nastavení hubu
    • 6. Správa hubu
    • 7. Pluginy
    • 8. Seznam příkazů
    • 9. Odstraňování problémů
    • 10. Instalace Verlihubu na Mac Os X
    • Verlihub update
    • GeoIP update
    • How to install Verlihub 1.0.0
    • Verlihub with MariaDB
    • Verlihub with Percona Server
    • LUA
      • Popis funkcí
      • Zpracování událostí
      • Pomocná Lua knihovna
      • Verlilinker
• Ledokol
  • Vlastnosti
  • Systémové požadavky
  • Ledokol download
  • Manuál
    • Konfigurace
    • Ledokol příkazy
    • Operator commands
  • Copyright
• DC na Youtube
• WebStats
• Mapa webu

DroiDC je malý a jednoduchý klient pro Direct Connect a Advanced Direct Connect fungující na systému Android

• Autor: Johan
• Web: gamers-united.ddns.net

• Provoz na zařízení s Android OS
• Funkční sdílení
• Funkční Download
• Funkční chat

Soubor rozbalte z ZIP a pote nahrajte APK soubor do telefonu

Oktober 22 of 2015.
Starting from scratch again.

I apreciate it if you could give me feedback on what you would like to see in future versions.


Todo:
Start designing a more 2015 look for the client
Rewrite the NMDC as well as the ADC parts i wrote for the yadroidcc 0.010
Release a beta version to those who are willing to test the new client.

První náhled na další DroiDC vydání, jedná se o odlehčenou verzi originálního DroiDC podporující pouze chat.

0.00x

YaDroiDDCC

A big thanks to:



Uhlik for keeping a wiki entry of my old DroiDC project, even though I 
couldn't read it, it inspired me to start over.



Iceman50 for providing the logo/icon I could use.



PPK, Pietry and many other dc-devs for helping out with my NMDC questions

all the guys in dc-dev hub wich helped me with all of my adc questions





===== Many thanks to the original Beta testers =====


KengYip to "help" with the 0.001 and 0.002 versions



The BETA testers of 0.001 - 0.003 of DroiDC and the Yadroidcc 0.010 
apreciated your feedback and bugreports



== Anyone I didn't specifically name but who did help me out, THANKS!! ==

• Svět Androida - DC klient už i pro Android
• Root.cz - Klient pro Direct Connect pro OS Android

EiskaltDC++ je program, který využívá Direct Connect a ADC protokol ke sdílení souborů. Je kompatibilní s ostatními DC klienty, jako je původní Neomodus DC, DC++ a jejich deriváty. EiskaltDC++ také spolupracuje se všemi běžnými DC hubsofty.

• Autor: dein.negativ, tka4ev, Tehnick a spousta dalších…
• Web: http://sourceforge.net/projects/eiskaltdcpp/
• Podpora: https://github.com/eiskaltdcpp/eiskaltdcpp/issues

Instalace klienta:

sudo apt-get install eiskaltdcpp

Instalace klienta pouze pro QT:

sudo apt-get install eiskaltdcpp-qt

Instalace klienta pouze pro GTK:

sudo apt-get install eiskaltdcpp-gtk

Instalace doplňků – emotikony, scripty, zvuky:

sudo apt-get install eiskaltdcpp-emoticons eiskaltdcpp-scripts eiskaltdcpp-sounds

Přidání repotizáře:

sudo add-apt-repository ppa:tehnick/tehnick

Načtení balíčků:

sudo apt-get update

Instalace klienta:

sudo apt-get install eiskaltdcpp-unstable

Instalace klienta pouze pro QT:

sudo apt-get install eiskaltdcpp-qt-unstable

Instalace klienta pouze pro GTK:

sudo apt-get install eiskaltdcpp-gtk-unstable

Instalace doplňků – emotikony, scripty, zvuky:

sudo apt-get install eiskaltdcpp-emoticons-unstable eiskaltdcpp-scripts-unstable eiskaltdcpp-sounds-unstable

EiskaltDC++ existuje ve více variantách, na vyběr je:

• GTK - standartní instalace (GTK nebo podle systému QT), možno vynutit instalaci použitím eiskaltdcpp-gtk
• GTK3 - GTK3 GUI instalace s použitím eiskaltdcpp-gtk3
• QT - QT GUI instalace s použitím eiskaltdcpp-qt
• QT-mini - odlehčená QT GUI (bez podpory scriptú a možná i dalších prvků) instalace s použitím eiskaltdcpp-qt-mini
• cli - command line interface instalace s použitím eiskaltdcpp-cli
• daemon - daemon instalace s použitím eiskaltdcpp-daemon

Další zdroje pro ostatní distribuce

• PKGBUILDs for Arch Linux in AUR: eiskaltdcpp
• Packages for ALT Linux: eiskaltdcpp (official repository)
• AgiliaLinux packages: eiskaltdcpp
• For OpenSUSE: eiskaltdcpp
• Packages for Fedora you can find in official repository of RussianFedora project. Direct links:
  • RussianFedora 13: i386, x86_64
  • RussianFedora 14: i386, x86_64
  • RussianFedora 15: i386, x86_64
• FreeBSD ports: eiskaltdcpp-qt and eiskaltdcpp-gtk

--- 2.2.9 2013-08-29 ---
*** common changes ***
* Fixed build with GCC < 4.6 and Clang < 3.1. This is the last release with
  support of old compilers.
* Fixed cmake rules for building with sr@latin localization.
* Small code refactoring and optimisation.
*** eiskaltdcpp-qt ***
* Improvements in search widget: now progress bar works as expected.
* Fixed segmentation fault on right click at some nicknames in public chats.
* Fixed SIGABRT during closing Tic-Tac-Toe QML widget.
* Fixed SIGABRT on program exit when QtScript "LogManager View" is active.
* A number of improvements for Mac OS X:
  - disabled system tray functionality (it never worked there as expected)
  - added special program menu to the dock icon
  - now program is hided into dock instead of exiting by the click on window
    close button
  - added platform-specific code to handle left click on program icon in dock
    (now it works as in native Mac OS X programs)
  - added dock icon jumping when there are new unread personal messages
  - added support for Retina displays (fonts are rendered in high resolution
    when program built with Qt 4.8.x)
  [Thanks to Dmitry Arkhipov who showed developers how Mac OS X looks like]
* Some platform-specific improvements in settings dialog: hided options which
  do not work in Mac OS X, MS Windows or Haiku.
*** eiskaltdcpp-gtk ***
* Improvements in search widget: now progress bar works as expected.
* Fixed SIGABRT when gdk_display_get_default() returns NULL.
*** eiskaltdcpp-daemon ***
* Fixed check of log file existence in daemon mode (see --syslog and --log
  command-line options).
*** eiskaltdcpp-cli ***
* Fixed work with libjson-rpc-perl >= 1.00 (module JSON::RPC::Client was moved
  to JSON::RPC::Legacy::Client there). [Thanks to Damyan Ivanov]

KDE

e17

Mac OSX

Windows

Verlihub je DC++ protokol server (hub). Běží na systémech s BSD/Unix/Linux/win32-64/MacOSX. Jeho schopnosti jsou bohaté a vysoce škálovatelné. Je napsán v C++ a je dostupná spousta užitečných pluginů, včetně LUA. Má velmi nízkou spotřebu RAM a CPU, dokáže udržet až 20 000 uživatelů. Stáhnout jej můžete z této stránky nebo z GIT. Pokud potřebujete technickou podporu, pripojte se na VAZ - Verli Admin Zone hub - dchub://hub.verlihub.net:7777

V současné době je přeloženo 41% textu.

Tento manuál byl upraven pro Verlihub-0.9.8e, ale měl by také fungovat s předchozími verzemi (a novějšími). Mějte na paměti, že je to referenční příručka speciálně zaměřená na vysvětlující operace a funkce Verlihubu jako celku a není to návod na konkrétní distribuci. Pro pomoc s konkrétní distribucí se ptejte na VAZ - Verli Admin Zone hub - dchub://hub.verlihub.net:7777

• 1. Začínáme
• 2. Instalace
• 3. První spuštění
• 4. Provoz Hubu
• 5. Nastavení hubu
• 6. Správa hubu
• 7. Pluginy
• 8. Seznam příkazů
• 9. Odstraňování problémů
• 10. Instalace Verlihubu na Mac Os X
• Verlihub update
• GeoIP update
• How to install Verlihub 1.0.0 - neoficialní návod k instalaci nové verze Verlihubu (made by Trumpy)
• Verlihub with MariaDB How to use mariadb instead of mysql - Verlihub 1.0.0rc (credits to G€r)
• Verlihub with Percona Server How to use percona server instead of mysql - Verlihub 1.0.0rc (credits to G€r)

• Ledokol - multifunkční skript
• Verlilinker - skript pro funkční spojení hubů

• Popis funkcí
• Zpracování událostí
• Pomocná Lua knihovna

• Informace o projektu: http://www.verlihub.net/
• Stránka projektu: http://www.sourceforge.net/projects/verlihub/
• VAZ - Verli Admin Zone hub - dchub://hub.verlihub.net:7777

Aktuální verze VerliHub 0.9.8e-r2

• Bz2 tarball
• Gz tarball
• SF.net project

Nejnovější Release Candidate

• Stable: 1.0.0-RC7
• Git: 2015-12-19
• GitHub

[ 2.8.8 :: 2015-11-29 ]

[  0] Fixed: Skip repeated main chat history messages from same user
[  0] Fixed: Chat replacer feature now replaces all possible occurrences instead of first random only
[  0] Fixed: Keep letter case sensitivity in messages that are being replaced, report by KCAHDEP
[  4] Fixed: Missing feed notifications in operator chat history when sender nick is not operator chat, report by KCAHDEP
[  0] Changed: chatantiflood is not used for chat flood detection type anymore, use each type configurations instead
[  0] Added: replprotect configuration to protect users from chat replacer feature, request by KCAHDEP
[  0] Added: custlistclass configuration to restrict users from using custlist and realnick commands, request by KCAHDEP
[  0] Added: Involved user information such as nick, IP address and class in all PM action notifications, request by KCAHDEP
[  0] Added: reluseclass configuration to restrict users from using rellist and relfind commands, request by KCAHDEP
[  0] Added: Main chat flood detection from single user with high interval
[  0] Added: Disable any type of chat flood detection by setting any of its *count or *int configurations to 0
[  0] Added: Notify user when his message is ignored on main chat flood from all detection
[  0] Added: Public bot message support to use in main chat history, idea by SCALOlĐ°z
[  0] Added: Support for chat_to_all script command, external scripts can use this to send main chat history line to Ledokol
[  1] Added: Build number starting from 1 to increase on every development and release update, request by Uhlik
[  2] Added: rcmenuoff command to disable or enable right click menu item
[  3] Added: Send script build number in all AVDB requests to help determine version specific issues
[  4] Added: Operator chat history stores messages on class basis allowing to save feed notificiations, idea by KCAHDEP

[ 2.8.7 :: 2015-10-03 ]

Fixed: rename command parameters when used from user menu, report by KCAHDEP
Fixed: Pingers can use +report command in PM to hub security bot when gag is set, report by KCAHDEP
Fixed: Incorrect IP in connect request notification
Fixed: Class number check on reglist command
Fixed: Don't allow forced infected user detection on users who don't share anything, report by KCAHDEP
Added: Save hub messages from operator chat bot in operator chat history, requires VH_OnOpChatMessage callback, request by KCAHDEP
Added: Turkish language, thanks to Mauron
Added: langfileprefix country code validation, also allows use of full country names in English
Added: User log search by country code

[ 2.8.6 :: 2015-07-11 ]

Fixed: Missing $OpList command separator, report by PPK
Fixed: Missing built in right click menu items, report by Uhlik
Changed: Hublist user lookup now accepts type parameter such as nick, desc, tag, conn, mail, share and ip
Added: Antispam debug option to see which entry caused detection
Added: histdel command to delete history messages by text, request by KCAHDEP
Added: Use custom nicks in all chatroom broadcasts when available
Added: Regular and country code chatroom history, request by KCAHDEP

[ 2.8.5 :: 2015-01-08 ]

Fixed: Correctly send $NoReport command to pingers, report by S0RiN
Fixed: Check syntax of oldclean command, report by KCAHDEP
Fixed: Don't notify user commands as messages sent to hub security
Fixed: Missing ban time when adding forbidden MyINFO parts
Changed: myinfadd command parameter syntax to <type> <"lre"> ["time"] ["note"]
Changed: Modify existing forbidden MyINFO item when it's added again
Changed: Restrict access of forced infected user detection report to AVDB
Changed: Replace new line character with space in antivirus detection file names
Changed: Country code gag now uses LRE instead of country code, request by KCAHDEP
Added: Optional parameter to add note for each forbidden MyINFO item, request by Uhlik
Added: Cache for protected users list, it's called too often, we don't want to put high load on MySQL server
Added: lretoplain command to convert LRE to plain text, idea by KCAHDEP
Added: histshowipclass configuration to show user IP in main chat history to users with set class and above, request by KCAHDEP
Removed: Messages on hub restart and stop, hub itself will do that for us

[ 2.8.4 :: 2014-11-17 ]

Fixed: Correctly remove user from operator ranks when he deletes his own registration
Changed: User registration notification now rely on plugin callbacks instead of command scans
Added: Public user registration notification for all classes, empty regnewpubmsg* to skip notification for that class, idea by KCAHDEP
Added: cURL will use same local address for connections as hub itself when defined
Added: cURL helper function now returns response headers if requested
Added: Avdb-Version-Count and Avdb-Delete-Count extension headers to use with AVDB load process

[ 2.8.3 :: 2014-10-05 ]

Fixed: Break the loop when infected user is found
Fixed: IP connect antiflood update would break the logout process when user is protected
Added: Detect invalid patterns before they are added, idea by Lord_Zero
Added: Detect virus spreaders by IP address and share aswell
Added: Antivirus search server to detect passive virus spreaders, requires LuaSocket
Added: List of blocked infected users in antivirus statistics, request by KCAHDEP
Added: chatcodeflag for destination of chat secirity code, 0 = MC+PM, 1 = MC, 2 = PM, request by KCAHDEP
Added: Automatic country chatroom entrance feature to allow users entering these chatrooms even when their country is different
Added: French, German and Lithuanian languages, only French is complete

[ 2.8.2 :: 2014-09-15 ]

Fixed: Check if user is protected before running antivirus scan on him
Fixed: Ignore translation file version number when updating to last development version, report by S0RiN
Fixed: Correctly escape backslash character in cURL parameters
Changed: histbotmsg value 0 = don't save bot messages, 1 = save all except main chat reminders, 2 = save all, idea by Uhlik
Added: When blocking infected users tell pingers to not send report, idea by S0RiN
Added: Command to force infected user detection
Added: Reduce size of AVDB to download by using "notime" parameter, idea by FlylinkDC
Added: Detection of special virus spreaders who reply to any random search request, enabled by default, idea by Lord_Zero and MaxFox
Added: Report path of infected files to AVDB
Added: Command to search in AVDB, known types are nick, addr, size and path

[ 2.8.1 :: 2014-08-30 ]

Added: Bot list to statistics collection
Added: Chat notification when news item is added, idea by Uhlik
Added: Virus spreader detection action to block connection requests to user, used by default, request by Ger
Added: "dev" and "force" parameters for "ledover" command available for class 10 to force update to last development and stable versions
Added: Try to download translation file when it doesn't exist
Added: Missing user agent on AVDB load
Added: Support for cURL exit codes to identify usage problems
Changed: Load AVDB using timestamp to reduce data transfer
Fixed: Negative GeoIP coordinates are valid
Fixed: Download correct translation file on script update
Fixed: Special NMDC characters in shell error messages were never escaped
Fixed: Show correct result on user lookup, either user is not found or server is down

[ 2.8.0 :: 2014-08-16 ]

Fixed: +me command triggered by operator did not perform any operations
Fixed: Renamed "cleanup" command to "oldclean" since Verlihub has got "clean*" prefix reserver for some of its own commands
Fixed: Pattern of "oldclean" command parameters
Fixed: Correctly encode nick with cURL on user lookup
Fixed: Case sensitivity in vote kicks, report by Uhlik
Fixed: Don't send user commands to clients that don't support them
Changed: Allow pingers to use +report command, required for AVDB
Changed: Store country code gags permanently, request by MaxFox
Added: Custom orderless gettext() format for translations, strings must be in format "english|translation\n" with each string on new line, comment with # character
Added: Detection of paramenter count mismatch in translation strings, this helps to detect errors in translation files
Added: Support for replace variables in mitagmessage, <cl> = client, <ve> = version, <mo> = mode, <hu> = hubs, <sl> = slots, <li> = limiter
Added: Virus spreader detection with AVDB support, requires cURL
Added: Antivirus statistics, general and for each user separately
Added: Load infected user list from AVDB and kick them when they log in, disabled by default
Added: Commands to clear kick votes for user and list all current votes, request by Uhlik
Added: Triggers with Ledokol replace variables support, request by S0RiN
Added: More replace variables: custnick class classname uuptshrt uuptlong userhost userip geoiprange geoipcity geoipregcode geoipregname geoipcc geoipcn geoipconcode geoipconname geoiptz geoipcoord geoippost geoipmetro geoiparea myinfodesc myinfotag tagclient tagversion tagmode taghubs tagslots taglimit myinfoconn myinfostat myinfomail myinfoshare myinfoexshar myinfosupport myinfonmdcver
Added: Support for L1=Local Network and P1=Private Network country codes

[ 2.7.9 :: 2014-06-25 ]

Fixed: Use newline character as delimiter in word ranks instead of using it as part of the word
Changed: Chat replacer now supports PM using flags, 0 = MC & PM, 1 = MC, 2 = PM, old and default items have 1 = MC, idea by JOE™
Added: Try to display country code along every IP address in hub feed messages
Added: Check for invalid patterns on antispam, search filter and forbidden MyINFO detections and their exceptions, feed message with solution is sent when error is found
Added: Feed notification for replaced PM messages aswell
Added: Main chat flood detection from all users, messages are ignored for now, enable with chatantiflood = 2
Added: List of users with same IP to user information

[ 2.7.8 :: 2014-04-08 ]

Fixed: Missing translations on ban and unban
Fixed: Secondary right click menu item order
Fixed: Version numbers comparison on update
Fixed: VIP kick was not accessible with new style commands in Verlihub
Changed: VIP kicks are made with users nick instead of bot nick
Added: Basic vote kicks using +votekick <nick>, configured with votekickclass and votekickcount
Added: CTM protocol flood actions, 0 = drop, 1 = kick, 2 = temporary ban, 3 = permanent ban, request by KCAHDEP

[ 2.7.7 :: 2014-04-05 ]

Fixed: Operator and user commands against multiple triggers in cmd_start_op and cmd_start_user
Fixed: Look for higher version during Ledokol update detection, report by KCAHDEP
Fixed: Don't try to send user commands to pingers
Changed: Ban and unban notifications now use OnNewBan and OnUnBan callbacks instead of scanning for commands, report by Uhlik
Changed: Don't notify /me command from operators
Added: Configuration antibelowclass that will override scanbelowclass for spam detection
Added: Configuration longdateformat to show in registered users list
Added: Right click menu feature to build custom user commands, set instrcmenu to 1 and see !ledohelp, user must reconnect to get new menu

[ 2.7.6 :: 2014-03-04 ] 

Fixed: Unknown user IP on unknown protocol command before user login
Fixed: Ban and unban notification without reason
Added: Full GeoIP information to user information, if supported by hub
Added: Updated country code list according to Maxminds ISO-3166 standard, also added "EU=European Union" and "AP=Asia Pacific Region" missing country codes, report by Uhlik
Added: "x" as multiplication character in calculator, you can use "*" or "x", idea by Uhlik
Added: "*" in <days> parameter to delete all users with chosen class on registered users table cleanup, idea by Uhlik
Added: !dropip <ip> command to drop users with specific IP address, sends notification to users with class classnotikick and higher
Added: +citylive <cc> command to show live user city statistics by country code
Added: mchistclass configuration to restrict main chat history to specific classes, idea by Lord_Zero
Added: Help notes to help command, request by Meka][Meka
Added: !ipinfo <ip> command to get GeoIP information about specific IP address
Added: Feed notification for replaced chat messages, real message is displayed, configured with classnotirepl, idea by Lord_Zero
Added: Separate kick time for clone detection, configured with miclonekicktime
Changed: Corrected some English language strings, report by madkid

[ 2.7.5 :: 2013-08-13 ]

Fixed: Consider custom nick when sending replaced main chat and private message on antispam action 9
Fixed: Duplication of IP gag entries, report by Uhlik
Added: Consider custom sender nick in receivers private chat when sending private message
Added: useripsupport configuration to enable $UserIP support for operators, off by default, request by Uhlik
Added: Information to operators about replaced main chat message on antispam action 9
Added: Update tables according to old version number so the script can load much faster
Added: histautonewlinedel configuration to allow deletion of new lines in automatic history messages, default is on
Added: Unknown protocol command detection before login, supported since Verlihub 1.0
Added: unkbeforelogin configuration to disable unknown protocol command detection before login, on by default
Added: Antispam action 10, hard ban the IP and drop user, hard ban feature must be enabled
Added: Client supports and NMDC version to MyINFO check and user information
Changed: Minimum value of histautolinemax is 0, means don't cut automatic history messages
Changed: Manually added IP gag entries are saved permanently, those added by antispam and antiflood remain temporary, request by Uhlik
Removed: Support for iConv
Removed: Support for LuaSocket and its modules
Removed: Hublist pinger feature
Removed: Old client $Capabilities from unknown protocol command exception list

[ 2.7.4 :: 2013-04-14 ]

Added: ulogautoclean = 30, meaning user logger will automatically delete entries older than 30 days, request by many people
Added: Soft hyphen character to forbidden nick list by default, request by PetterOSS
Added: Ability to use A1, A2 and --, unknown, in all country code functions
Changed: Now using Team Elite Hublist instead of FearDC Hublist for user search
Fixed: Ban notification without reason, report by Uhlik
Fixed: Invalid translation on !wmforce command for user without access, report by Uhlik
Removed: $UserIP support, now supported by Verlihub

[ 2.7.3 :: 2012-02-22 ]

Changed: Using FearDC Hublist instead of QSDCHublist.com for user lookup
Changed: User lookup no longer requires iConv
Fixed: Correct usage of percent character in string.gsub Lua function
Fixed: Chat modes when changing for yourself
Fixed: Unknown protocol command function for Verlihub 1.0.0
Fixed: Broken IP gag flags
Added: Support for Lua 5.2 and backward compatibility for Lua 5.1
Added: Country code gag, request by Trumpy

[ 2.7.2 :: 2011-05-16 ]

Fixed: Missing function parameter, report by Uhlik

[ 2.7.1 :: 2011-05-16 ]

Fixed: Garbage collection timer interval
Fixed: Missing translation on blacklist notification
Fixed: Custom nick removal when used by real user, report by Aeolide
Fixed: Critical search filter vulnerability
Added: $ConnectToMe protocol flood detection
Added: Automatic Ledokol update check with custom interval, request by Marcel and Uhlik
Added: Support for VH:GetTopic and VH:SetTopic
Added: Custom character list for chat code, request by Maximum
Added: Ability to add multiple hard IP bans at once, separate each IP by space
Added: IP watch to notify about public user actions from IP or range, idea by Lord_Zero
Added: Using CC chatroom share size as member counter
Improved: Hard IP ban entry is always found in the beginning of a string
Changed: Renamed configuration variable classnotictm to classnotibadctm
Changed: Using country name in CC chatroom description

[ 2.7.0 :: 2011-03-15 ]

Fixed: Misspelling of configuration variable addspecialver
Fixed: Spam detection after translit conversion
Fixed: Some menu items are created when corresponding features are disabled, report by Uhlik
Fixed: Flood detection before IP gag detection
Fixed: Error on IP gag check, report by Trumpy
Fixed: Cyrillic conversion table, report by Aeolide
Fixed: Error when saving topic, report by Jaguar
Added: Ability for users to see themselves as operators
Added: Hard IP ban ability
Added: Requirement to gain some uptime in order to use search engine
Added: Blacklist support, very slow with large blacklists
Added: Split fake share detection into same numbers and divide by unit detections
Added: Current topic and its owner to statistics table
Added: Clone detection actions
Added: <cn> which represents country name in ccroomstyle variable
Removed: nGrep support

[ 2.6.9 :: 2011-01-14 ]

Fixed: Allow messages to hub security bot for users not allowed to send PM, report by Trumpy
Fixed: Lua error on !replug, report by Toecutter
Fixed: Command logger against plugin commands
Fixed: Replaced chat messages containing inappropriate replace variables
Added: -L option for cURL to follow redirects, report by Marcel
Added: clearclass configuration variable for !clear command restriction, request by Neolo
Added: <avgshare>, <peakavgshare>, <peakavgsharetime> and <peakavgshareshrttime> replace variables, request by Uhlik
Added: Accept case insensitive chat security code when chatcodeon is set to 2
Added: Blocked PM list to disallow sending private messages to certain users
Added: IP gag flags to gag in MC, PM or both, request by Marcel
Added: Flood detection now drops, kicks, bans all users with detected IP instead of the last one only, request by Maximum
Added: Cleanup for antispam and search filter, request by Marcel
Added: Experts only section to Ledokol help
Removed: LuaSocket and nGrep warning messages

• Ledokol File Server

• Ledokol Archiv

ApexDC++ je inovativní DC klient vycházející ze StrongDC++. Obsahuje externí pluginy a scriptování pomocí LUA a další vlastnosti. Operátoři hubů i běžní uživatelé si určitě oblíbí vlastnosti tohoto klienta.

• Autor: Lee (Project Manager), Crise (Lead Coder), Tom (Website Maintenance)
• Web: http://www.apexdc.net/
• Forum: http://forums.apexdc.net/

• Nastala chyba při vytváření tohoto RSS: http://forums.apexdc.net/rss/forums/1-apexdc-news/

• DHT Globální síť
• Segmentové stahování
• Inteligentní šíření souborů
• Vylepšené Plugin API
• LUA Scriptování
• Lepší služby podpory

ApexDC++ 1.6.2

Fix: NMDC exploit re-routing search requests to flood a server with UDP traffic (DDoS)
Change: Inno setup script updated to split out based on processor architecture
Change: Removed OpenCandy integration from setup (no offers on installation)

ApecDC++ 1.6.1

Fix: A very rare crash related to favorite hub removal under certain conditions
Fix: Infinitely retrying update check when there is no connectivity (again)
Fix: Connectívity issues with encrypted connections (thanks Night)
Change: Moved from subversion to git for version control
Change: Multiple versioning and update check changes related to moving to git (plus about box changes)
Change: Boost upgrade to 1.59
Change: OpenSSL upgrade to 1.0.2h, and related changes
Change: Fresh WTL snapshot, included within our source code distribution from now on
Change: Updated Innosetup to 5.5.9 and cleaned up some installer code
Change: Updated to MSVC 2015 Update 2
Change: Redistributables in setup file have been updated

ApexDC++ 1.6.0

Fix: Ignore expired certificates for KEYP to prevent connection issues
Change: Upgraded to OpenSSL 1.0.1i
Change: Ability to block fraudulent hub domains (ADC-Fun.com has been added)
Change: Update check improvements (close button no longer greyed out)
Change: Change behaviour towards default encryption settings to avoid hub hijacking

ApexDC++ 1.5.14

Security vulnerability: Upgraded to OpenSSL 1.0.1h
Change: Added further diagnostics for user certificate errors in system logs
Change: TLS 1.1 and 1.2 protocols now permitted (DC++)

An attacker using a carefully crafted handshake can force the use of weak keying material in OpenSSL SSL/TLS clients and servers. This can be exploited by a Man-in-the-middle (MITM) attack where the attacker can decrypt and modify traffic from the attacked client and server.

Therefore we advise all users on previous versions to upgrade to 1.5.14 immediately.

ApexDC++ 1.5.13

Fix: Potential crash when download queue contains files without an extension
Fix: [NMDC] Prevent crashes when receiving malicious search requests (DC++)
Fix: ApexDC becoming unresponsive in some edge cases when update check fails

ApexDC++ 1.5.12

Fix: Download Queue context menu not working
Fix: Moving plugins up or down would crash ApexDC (Issue #396)
Fix: Loading certain plugins would crash ApexDC (Issue #412)
Change: Adjust some compiler options to avoid potential problems

ApexDC++ 1.5.11

Heartbleed: A security fix for the recent Heartbleed vulnerability found in OpenSSL.
Fix: Subtract List shortcut was broken in 1.5.10 (Issue #395)
Fix: Deselecting a folder in Share settings would not deselect subfolders (Issue #399)
Fix: Preview video option disappeared (Issue #398)
Fix: Improvements to how certificate verification is handled and improved logs
Fix: Avoid checking keyprint twice for uploads

[ 2.8.9 :: 2016-03-23 ]

[  6] Fixed: Chat replacer feature now replaces all occurrences of an entry instead of first only
[  6] Fixed: Possible error when unloading Lua plugin, report by KCAHDEP
[ 11] Fixed: Search filter block list was never blocking
[ 12] Fixed: Escape of special characters in chat messages from other scripts, report by KCAHDEP
[ 12] Fixed: Incorrect position of next word in chat replacer, report by KCAHDEP
[ 13] Fixed: Error when settings some configurations to empty value
[  5] Added: Support for new VH_OnParsedMsgSupports callback
[  8] Added: Search filter actions 8 and 9 to block all next search requests from user, action 8 is silent
[  9] Added: Chat replacer exception types, 0 = nick, 1 = IP and 2 = LRE, request by KCAHDEP
[ 10] Added: Hub URL to user information when available
[ 11] Added: sefiblockdel to delete user from search filter block list on logout
[ 11] Added: sefibllist command to show users in search filter block list
[ 11] Added: sefibldel command to delete users from search filter block list
[ 14] Added: Take advantage of VH_OnSetConfig callback if supported by hub
[ 15] Added: Support for opchat_to_all script command, external scripts can use this to send operator chat history line to Ledokol
[ 16] Added: Requirement to gain some uptime in order to use public and private chats and related commands
[ 16] Added: Notification on low registration, search and chat uptimes
[  7] Removed: Infected user redirect to AVDB quarantine hub

[ 2.8.8 :: 2015-11-29 ]

[  0] Fixed: Skip repeated main chat history messages from same user
[  0] Fixed: Chat replacer feature now replaces all possible occurrences instead of first random only
[  0] Fixed: Keep letter case sensitivity in messages that are being replaced, report by KCAHDEP
[  4] Fixed: Missing feed notifications in operator chat history when sender nick is not operator chat, report by KCAHDEP
[  0] Changed: chatantiflood is not used for chat flood detection type anymore, use each type configurations instead
[  0] Added: replprotect configuration to protect users from chat replacer feature, request by KCAHDEP
[  0] Added: custlistclass configuration to restrict users from using custlist and realnick commands, request by KCAHDEP
[  0] Added: Involved user information such as nick, IP address and class in all PM action notifications, request by KCAHDEP
[  0] Added: reluseclass configuration to restrict users from using rellist and relfind commands, request by KCAHDEP
[  0] Added: Main chat flood detection from single user with high interval
[  0] Added: Disable any type of chat flood detection by setting any of its *count or *int configurations to 0
[  0] Added: Notify user when his message is ignored on main chat flood from all detection
[  0] Added: Public bot message support to use in main chat history, idea by SCALOlĐ°z
[  0] Added: Support for chat_to_all script command, external scripts can use this to send main chat history line to Ledokol
[  1] Added: Build number starting from 1 to increase on every development and release update, request by Uhlik
[  2] Added: rcmenuoff command to disable or enable right click menu item
[  3] Added: Send script build number in all AVDB requests to help determine version specific issues
[  4] Added: Operator chat history stores messages on class basis allowing to save feed notificiations, idea by KCAHDEP

[ 2.8.7 :: 2015-10-03 ]

Fixed: rename command parameters when used from user menu, report by KCAHDEP
Fixed: Pingers can use +report command in PM to hub security bot when gag is set, report by KCAHDEP
Fixed: Incorrect IP in connect request notification
Fixed: Class number check on reglist command
Fixed: Don't allow forced infected user detection on users who don't share anything, report by KCAHDEP
Added: Save hub messages from operator chat bot in operator chat history, requires VH_OnOpChatMessage callback, request by KCAHDEP
Added: Turkish language, thanks to Mauron
Added: langfileprefix country code validation, also allows use of full country names in English
Added: User log search by country code

[ 2.8.6 :: 2015-07-11 ]

Fixed: Missing $OpList command separator, report by PPK
Fixed: Missing built in right click menu items, report by Uhlik
Changed: Hublist user lookup now accepts type parameter such as nick, desc, tag, conn, mail, share and ip
Added: Antispam debug option to see which entry caused detection
Added: histdel command to delete history messages by text, request by KCAHDEP
Added: Use custom nicks in all chatroom broadcasts when available
Added: Regular and country code chatroom history, request by KCAHDEP

[ 2.8.5 :: 2015-01-08 ]

Fixed: Correctly send $NoReport command to pingers, report by S0RiN
Fixed: Check syntax of oldclean command, report by KCAHDEP
Fixed: Don't notify user commands as messages sent to hub security
Fixed: Missing ban time when adding forbidden MyINFO parts
Changed: myinfadd command parameter syntax to <type> <"lre"> ["time"] ["note"]
Changed: Modify existing forbidden MyINFO item when it's added again
Changed: Restrict access of forced infected user detection report to AVDB
Changed: Replace new line character with space in antivirus detection file names
Changed: Country code gag now uses LRE instead of country code, request by KCAHDEP
Added: Optional parameter to add note for each forbidden MyINFO item, request by Uhlik
Added: Cache for protected users list, it's called too often, we don't want to put high load on MySQL server
Added: lretoplain command to convert LRE to plain text, idea by KCAHDEP
Added: histshowipclass configuration to show user IP in main chat history to users with set class and above, request by KCAHDEP
Removed: Messages on hub restart and stop, hub itself will do that for us

[ 2.8.4 :: 2014-11-17 ]

Fixed: Correctly remove user from operator ranks when he deletes his own registration
Changed: User registration notification now rely on plugin callbacks instead of command scans
Added: Public user registration notification for all classes, empty regnewpubmsg* to skip notification for that class, idea by KCAHDEP
Added: cURL will use same local address for connections as hub itself when defined
Added: cURL helper function now returns response headers if requested
Added: Avdb-Version-Count and Avdb-Delete-Count extension headers to use with AVDB load process

[ 2.8.3 :: 2014-10-05 ]

Fixed: Break the loop when infected user is found
Fixed: IP connect antiflood update would break the logout process when user is protected
Added: Detect invalid patterns before they are added, idea by Lord_Zero
Added: Detect virus spreaders by IP address and share aswell
Added: Antivirus search server to detect passive virus spreaders, requires LuaSocket
Added: List of blocked infected users in antivirus statistics, request by KCAHDEP
Added: chatcodeflag for destination of chat secirity code, 0 = MC+PM, 1 = MC, 2 = PM, request by KCAHDEP
Added: Automatic country chatroom entrance feature to allow users entering these chatrooms even when their country is different
Added: French, German and Lithuanian languages, only French is complete

[ 2.8.2 :: 2014-09-15 ]

Fixed: Check if user is protected before running antivirus scan on him
Fixed: Ignore translation file version number when updating to last development version, report by S0RiN
Fixed: Correctly escape backslash character in cURL parameters
Changed: histbotmsg value 0 = don't save bot messages, 1 = save all except main chat reminders, 2 = save all, idea by Uhlik
Added: When blocking infected users tell pingers to not send report, idea by S0RiN
Added: Command to force infected user detection
Added: Reduce size of AVDB to download by using "notime" parameter, idea by FlylinkDC
Added: Detection of special virus spreaders who reply to any random search request, enabled by default, idea by Lord_Zero and MaxFox
Added: Report path of infected files to AVDB
Added: Command to search in AVDB, known types are nick, addr, size and path

[ 2.8.1 :: 2014-08-30 ]

Added: Bot list to statistics collection
Added: Chat notification when news item is added, idea by Uhlik
Added: Virus spreader detection action to block connection requests to user, used by default, request by Ger
Added: "dev" and "force" parameters for "ledover" command available for class 10 to force update to last development and stable versions
Added: Try to download translation file when it doesn't exist
Added: Missing user agent on AVDB load
Added: Support for cURL exit codes to identify usage problems
Changed: Load AVDB using timestamp to reduce data transfer
Fixed: Negative GeoIP coordinates are valid
Fixed: Download correct translation file on script update
Fixed: Special NMDC characters in shell error messages were never escaped
Fixed: Show correct result on user lookup, either user is not found or server is down

[ 2.8.0 :: 2014-08-16 ]

Fixed: +me command triggered by operator did not perform any operations
Fixed: Renamed "cleanup" command to "oldclean" since Verlihub has got "clean*" prefix reserver for some of its own commands
Fixed: Pattern of "oldclean" command parameters
Fixed: Correctly encode nick with cURL on user lookup
Fixed: Case sensitivity in vote kicks, report by Uhlik
Fixed: Don't send user commands to clients that don't support them
Changed: Allow pingers to use +report command, required for AVDB
Changed: Store country code gags permanently, request by MaxFox
Added: Custom orderless gettext() format for translations, strings must be in format "english|translation\n" with each string on new line, comment with # character
Added: Detection of paramenter count mismatch in translation strings, this helps to detect errors in translation files
Added: Support for replace variables in mitagmessage, <cl> = client, <ve> = version, <mo> = mode, <hu> = hubs, <sl> = slots, <li> = limiter
Added: Virus spreader detection with AVDB support, requires cURL
Added: Antivirus statistics, general and for each user separately
Added: Load infected user list from AVDB and kick them when they log in, disabled by default
Added: Commands to clear kick votes for user and list all current votes, request by Uhlik
Added: Triggers with Ledokol replace variables support, request by S0RiN
Added: More replace variables: custnick class classname uuptshrt uuptlong userhost userip geoiprange geoipcity geoipregcode geoipregname geoipcc geoipcn geoipconcode geoipconname geoiptz geoipcoord geoippost geoipmetro geoiparea myinfodesc myinfotag tagclient tagversion tagmode taghubs tagslots taglimit myinfoconn myinfostat myinfomail myinfoshare myinfoexshar myinfosupport myinfonmdcver
Added: Support for L1=Local Network and P1=Private Network country codes

[ 2.7.9 :: 2014-06-25 ]

Fixed: Use newline character as delimiter in word ranks instead of using it as part of the word
Changed: Chat replacer now supports PM using flags, 0 = MC & PM, 1 = MC, 2 = PM, old and default items have 1 = MC, idea by JOE™
Added: Try to display country code along every IP address in hub feed messages
Added: Check for invalid patterns on antispam, search filter and forbidden MyINFO detections and their exceptions, feed message with solution is sent when error is found
Added: Feed notification for replaced PM messages aswell
Added: Main chat flood detection from all users, messages are ignored for now, enable with chatantiflood = 2
Added: List of users with same IP to user information

[ 2.7.8 :: 2014-04-08 ]

Fixed: Missing translations on ban and unban
Fixed: Secondary right click menu item order
Fixed: Version numbers comparison on update
Fixed: VIP kick was not accessible with new style commands in Verlihub
Changed: VIP kicks are made with users nick instead of bot nick
Added: Basic vote kicks using +votekick <nick>, configured with votekickclass and votekickcount
Added: CTM protocol flood actions, 0 = drop, 1 = kick, 2 = temporary ban, 3 = permanent ban, request by KCAHDEP

[ 2.7.7 :: 2014-04-05 ]

Fixed: Operator and user commands against multiple triggers in cmd_start_op and cmd_start_user
Fixed: Look for higher version during Ledokol update detection, report by KCAHDEP
Fixed: Don't try to send user commands to pingers
Changed: Ban and unban notifications now use OnNewBan and OnUnBan callbacks instead of scanning for commands, report by Uhlik
Changed: Don't notify /me command from operators
Added: Configuration antibelowclass that will override scanbelowclass for spam detection
Added: Configuration longdateformat to show in registered users list
Added: Right click menu feature to build custom user commands, set instrcmenu to 1 and see !ledohelp, user must reconnect to get new menu

[ 2.7.6 :: 2014-03-04 ] 

Fixed: Unknown user IP on unknown protocol command before user login
Fixed: Ban and unban notification without reason
Added: Full GeoIP information to user information, if supported by hub
Added: Updated country code list according to Maxminds ISO-3166 standard, also added "EU=European Union" and "AP=Asia Pacific Region" missing country codes, report by Uhlik
Added: "x" as multiplication character in calculator, you can use "*" or "x", idea by Uhlik
Added: "*" in <days> parameter to delete all users with chosen class on registered users table cleanup, idea by Uhlik
Added: !dropip <ip> command to drop users with specific IP address, sends notification to users with class classnotikick and higher
Added: +citylive <cc> command to show live user city statistics by country code
Added: mchistclass configuration to restrict main chat history to specific classes, idea by Lord_Zero
Added: Help notes to help command, request by Meka][Meka
Added: !ipinfo <ip> command to get GeoIP information about specific IP address
Added: Feed notification for replaced chat messages, real message is displayed, configured with classnotirepl, idea by Lord_Zero
Added: Separate kick time for clone detection, configured with miclonekicktime
Changed: Corrected some English language strings, report by madkid

[ 2.7.5 :: 2013-08-13 ]

Fixed: Consider custom nick when sending replaced main chat and private message on antispam action 9
Fixed: Duplication of IP gag entries, report by Uhlik
Added: Consider custom sender nick in receivers private chat when sending private message
Added: useripsupport configuration to enable $UserIP support for operators, off by default, request by Uhlik
Added: Information to operators about replaced main chat message on antispam action 9
Added: Update tables according to old version number so the script can load much faster
Added: histautonewlinedel configuration to allow deletion of new lines in automatic history messages, default is on
Added: Unknown protocol command detection before login, supported since Verlihub 1.0
Added: unkbeforelogin configuration to disable unknown protocol command detection before login, on by default
Added: Antispam action 10, hard ban the IP and drop user, hard ban feature must be enabled
Added: Client supports and NMDC version to MyINFO check and user information
Changed: Minimum value of histautolinemax is 0, means don't cut automatic history messages
Changed: Manually added IP gag entries are saved permanently, those added by antispam and antiflood remain temporary, request by Uhlik
Removed: Support for iConv
Removed: Support for LuaSocket and its modules
Removed: Hublist pinger feature
Removed: Old client $Capabilities from unknown protocol command exception list

[ 2.7.4 :: 2013-04-14 ]

Added: ulogautoclean = 30, meaning user logger will automatically delete entries older than 30 days, request by many people
Added: Soft hyphen character to forbidden nick list by default, request by PetterOSS
Added: Ability to use A1, A2 and --, unknown, in all country code functions
Changed: Now using Team Elite Hublist instead of FearDC Hublist for user search
Fixed: Ban notification without reason, report by Uhlik
Fixed: Invalid translation on !wmforce command for user without access, report by Uhlik
Removed: $UserIP support, now supported by Verlihub

[ 2.7.3 :: 2012-02-22 ]

Changed: Using FearDC Hublist instead of QSDCHublist.com for user lookup
Changed: User lookup no longer requires iConv
Fixed: Correct usage of percent character in string.gsub Lua function
Fixed: Chat modes when changing for yourself
Fixed: Unknown protocol command function for Verlihub 1.0.0
Fixed: Broken IP gag flags
Added: Support for Lua 5.2 and backward compatibility for Lua 5.1
Added: Country code gag, request by Trumpy

[ 2.7.2 :: 2011-05-16 ]

Fixed: Missing function parameter, report by Uhlik

[ 2.7.1 :: 2011-05-16 ]

Fixed: Garbage collection timer interval
Fixed: Missing translation on blacklist notification
Fixed: Custom nick removal when used by real user, report by Aeolide
Fixed: Critical search filter vulnerability
Added: $ConnectToMe protocol flood detection
Added: Automatic Ledokol update check with custom interval, request by Marcel and Uhlik
Added: Support for VH:GetTopic and VH:SetTopic
Added: Custom character list for chat code, request by Maximum
Added: Ability to add multiple hard IP bans at once, separate each IP by space
Added: IP watch to notify about public user actions from IP or range, idea by Lord_Zero
Added: Using CC chatroom share size as member counter
Improved: Hard IP ban entry is always found in the beginning of a string
Changed: Renamed configuration variable classnotictm to classnotibadctm
Changed: Using country name in CC chatroom description

[ 2.7.0 :: 2011-03-15 ]

Fixed: Misspelling of configuration variable addspecialver
Fixed: Spam detection after translit conversion
Fixed: Some menu items are created when corresponding features are disabled, report by Uhlik
Fixed: Flood detection before IP gag detection
Fixed: Error on IP gag check, report by Trumpy
Fixed: Cyrillic conversion table, report by Aeolide
Fixed: Error when saving topic, report by Jaguar
Added: Ability for users to see themselves as operators
Added: Hard IP ban ability
Added: Requirement to gain some uptime in order to use search engine
Added: Blacklist support, very slow with large blacklists
Added: Split fake share detection into same numbers and divide by unit detections
Added: Current topic and its owner to statistics table
Added: Clone detection actions
Added: <cn> which represents country name in ccroomstyle variable
Removed: nGrep support

[ 2.6.9 :: 2011-01-14 ]

Fixed: Allow messages to hub security bot for users not allowed to send PM, report by Trumpy
Fixed: Lua error on !replug, report by Toecutter
Fixed: Command logger against plugin commands
Fixed: Replaced chat messages containing inappropriate replace variables
Added: -L option for cURL to follow redirects, report by Marcel
Added: clearclass configuration variable for !clear command restriction, request by Neolo
Added: <avgshare>, <peakavgshare>, <peakavgsharetime> and <peakavgshareshrttime> replace variables, request by Uhlik
Added: Accept case insensitive chat security code when chatcodeon is set to 2
Added: Blocked PM list to disallow sending private messages to certain users
Added: IP gag flags to gag in MC, PM or both, request by Marcel
Added: Flood detection now drops, kicks, bans all users with detected IP instead of the last one only, request by Maximum
Added: Cleanup for antispam and search filter, request by Marcel
Added: Experts only section to Ledokol help
Removed: LuaSocket and nGrep warning messages

• Ledokol File Server

• Ledokol Archiv